Configure Microsoft 365
This topic explains how to set up Microsoft 365 to route email through Sophos Gateway.
For help with Microsoft 365 (formerly Office 365) see Microsoft 365 documentation.
Add your domain and verify ownership
You need to add your domain.
You will need to provide the following information when configuring Sophos Email Security to process and deliver email for your domain:
- Your email domain name.
- Your mail delivery destination host as a Fully Qualified Domain Name (FQDN) or IP address.
- The port number used to listen for SMTP traffic on the mail delivery destination host. This is usually port 587.
To find your FQDN for Office 365:
- Log into the Office portal.
- Select Domains.
Copy the value displayed for the expected MX record.
The format is normally
To add a domain in Sophos Central, do as follows:
- Click Email Security > Settings.
- Click Domain Settings/Status.
- Click Add Domain.
- Enter your email domain details, the direction of traffic, and delivery destination details.
- Next, click Verify Domain Ownership.
Copy the TXT value presented in the Verify Domain Ownership dialog.
This value is specific to your email domain.
Create a TXT DNS record in the root level of the domain name you entered earlier and paste the TXT value that you copied earlier. You can give it the same TXT name as shown or use
@. If you're not sure how to do this, contact the organization that registered your domain name.
- Once the new TXT DNS record entry is saved, click Verify.
Once the DNS update with the correct TXT value is propagated, a message is returned indicating that domain verification was successful.
If the DNS update has not yet propagated, or if the value entered is incorrect, a failure message is returned. Confirm that the value entered is correct.
The domain verification process may take some time to complete.
You can now add mailboxes to Sophos Email Security. See Add mailboxes
When you have added your mailboxes, continue with configuring your Microsoft 365 environment.
Bypass Exchange Online Protection in Microsoft 365
If you are using Sophos Gateway for your spam filtering and clean email is delivered to Microsoft 365 (formerly Office 365), you need to bypass Exchange Online Protection (EOP) to ensure smooth delivery of your mail.
To bypass Exchange Online Protection:
- Log in to the Microsoft 365 portal.
- Under Admin Centers, choose Exchange.
- Under Mail flow, select Rules.
- Click the + to add a new rule and choose Bypass Spam Filtering from the menu.
Set the following values:
Option Value Name
Sophos Central EOP Bypass
Apply this rule if Apply to all messages Do the following Set the spam confidence level (SCL) to... Audit this rule with severity level Low Choose a mode for this rule Enforce
Click Save to add the rule.
Restrict delivery to Sophos IP addresses
You can configure the connection to your mail host to only use our delivery IPs.
Restricting delivery IPs adds additional security to the integration between Sophos Gateway and your mail host.
Before you proceed, we strongly recommend testing email traffic and domain configuration in a non-production or test environment before making any changes to your organization's email configuration.
The specific delivery IP you need to use depends on the region where your Sophos Central account is hosted. When you created your Sophos Central account, you chose which country to store your data in.
You must also add the Sophos IPs to the IP allow list for your mail server. If you don't, your users won't receive their emails.
|Region||Sophos gateway IPs|
|US (West)||188.8.131.52 |
|US (East)||184.108.40.206 |
Using an IP other than the one specified for your region prevents mail from flowing correctly.
Configure a Secure Connector between Microsoft 365 and Sophos Gateway
You need to configure a secure connector to Sophos Gateway.
These instructions are for connecting Sophos Gateway to Microsoft 365. For instructions on connecting Sophos Mailflow to Microsoft 365, see Set up Sophos Mailflow.
The following instructions are taken from Microsoft's Set up connectors for secure mail flow with a partner organization in Exchange Online help page. We recommend you check Microsoft's help for updates before changing your email configuration. References to Office 365 may still exist as well as references to Microsoft 365.
To configure the secure connector:
- Log in to your Microsoft 365 (formerly Office 365) Admin Portal.
- Click Exchange then go to Exchange Admin Center.
- Click Mail flow then click Connectors. The Connectors screen appears.
- Click the + to add a new connector.
- Select Partner Organization in the From field.
- Select Office 365 in the To field.
- Click Next.
- Enter a name for the connector. Sophos Email Connector is recommended.
- Enter a description (optional).
- If you want to turn the connector on immediately after saving, leave the box labeled, Turn it on checked. Otherwise, uncheck the box to turn it on later.
- Click Next.
- Select Use the sender's domain.
- Click the + to add a sender domain.
- Enter * to apply the settings to all sender domains.
- Click Next.
- Select Reject email messages if they aren't sent over TLS and Reject email messages if they aren't sent from within this IP address range.
- Click the + to add sender IP addresses.
Enter the Sophos Email Security Delivery IP address for your region here.
To find out which IP address to use, see Restrict delivery to Sophos IP addresses.
- Verify the new connector settings and click Save.
When you configure a connector this way, only mail coming from Sophos Central IPs will be accepted by Office 365.
Change your MX records to point to Sophos Gateway
Changing your domain's MX records to point to Sophos Gateway is crucial to successful deployment and ensures all email is filtered and delivered.
If you can't make these changes yourself, contact your IT department, hosting provider, ISP, or Domain Name Service provider and arrange for the MX records for your domains to be modified.
When you created your Sophos Central account, you selected a region where you wanted to store your data. Your MX records are dependent on this region.
Change your MX records to include the record names associated with the region where you chose to store your data.
|United States (West)||10, |
|United States (East)||10, |
Take care with all options to ensure that the spelling and numbers are correct.
Using MX record names other than those provided prevents mail from flowing correctly.
When changing DNS entries like MX records, we recommend lowering the TTL (to 600 ms or less) well in advance of updating the entries. This allows the change to propagate quickly and provides a quick way to revert changes, if any issues arise during testing.
Test and confirm mail flow
Once you have updated your MX records, send a test message to any of your mailboxes protected by Sophos Gateway. For a true test, you should send your test message from an address outside of your email domain.
To confirm that the message flowed through Sophos Gateway, you can view the Message History Report.
To access the report:
- In Sophos Central, click Logs and Reports.
Click Message History.
If messages are flowing through the system, you will see entries in this report.
If mail is not flowing, meaning you are not receiving email to your test inbox, take the following steps:
- Verify that your MX records are correct for your region.
- Verify that you set up the Sophos Delivery IPs correctly in your gateway, firewall or connector.
- Verify that the mailbox that you are sending to exists in Sophos Email Security.
If you have taken all these steps and mail is still not flowing for your domain, you should contact Sophos Support.