Skip to content

Networks

You can add and view details of connected networks. You can add networks manually, or they can be dynamically added from DHCP. The Configuration source is shown as Switch when a network is dynamically added. It is shown as the site name that the switch is assigned to when you've manually added the network.

To add a network, do as follows:

  1. Select IPv4.

  2. Click Add network.

  3. Select the VLAN from the drop-down menu.

    Select VLAN

  4. Enter the IP address of the network.

    Enter IP address

  5. Enter the Subnet mask of the network.

    Enter subnet

  6. Click Save.

  1. Select IPv6.

  2. Click Add network.

  3. Select the VLAN from the drop-down menu.

    Select VLAN

  4. Enter at least one of the following:

    • Linklocal IP address and Prefix.

      Enter linklocal IP address and prefix

    • Unicast IP address and Prefix

      Enter unicast IP address and prefix

  5. Click Save.