Advanced firewall configuration
/
Configuring the firewall
Parent topic
:
Configuring the firewall
Previous topic
:
Turn the use of checksums on or off
Next topic
:
Filter ICMP messages
Allow or block IPv6 packets
To allow or block IPv6 packets:
Double-click the firewall policy you want to change.
On the
Welcome
page of the
Firewall Policy
wizard, click
Advanced firewall policy
.
Under
Configurations
, click
Configure
next to the location for which you want to configure the firewall.
On the
General
tab, under
Blocking
, clear or select the
Block IPv6 packets
check box.