Sophos-branded physical appliance serial console
The serial console shows the LCD panel information as text. You can use it to monitor the appliance when network access isn't available and to access the appliance CLI.
This page explains how to connect to the serial console, monitor activation, and troubleshoot serial console and activation issues.
When to use the console
The LCD panel and serial console both work when the appliance doesn't have network access.
Use the serial console when you're physically connected to the appliance and want to monitor its status or activation progress.
The serial console shows the same activation states as the LCD panel. See Troubleshooting activation.
Connect to the serial console
To connect to the serial console, do as follows:
- Connect your computer to the serial console port on the appliance.
- Open a serial terminal application, such as PuTTY.
-
Configure the serial connection with the following settings:
Setting Value Baud rate 38400 or 115200, depending on the appliance model Data bits 8 Parity None Stop bits 1 Use one of the following serial cables:
- An RJ45-to-USB or RJ45-to-USB-C serial cable
- A USB-C-to-USB or USB-C-to-USB-C serial cable
-
In the serial terminal application, open the configured connection.
The serial console shows a message similar to the following example:
Sophos Network Detection and Response (NDR) Appliance OS Installation & Initialization [INFO] Starting Sophos NDR setup, please wait...
The appliance can take several minutes to complete startup. During this time, the serial console shows status information from the appliance.
Open the appliance CLI
After the serial console finishes starting, press Ctrl+\ to open the appliance CLI.
Exit the CLI to return to the serial console.
Reading the console during activation
Each console message starts with a tag in brackets. Check "[ERROR]" and "[WARN]" messages first when you're troubleshooting activation.
The console shows the following messages as the appliance moves through activation. For troubleshooting steps, see Troubleshooting activation.
| Console prints | What it means |
|---|---|
| "[LINK] EXTP Port: Link down." or "Link established." | The EXTP port has lost or established a network link. |
| "[DHCP] EXTP Port: Requesting IP address..." | The appliance is waiting for network settings from DHCP. |
| "[DHCP] EXTP Port: IP address assigned successfully." | The appliance received an IP address from DHCP. |
| "[IP] EXTP Port: Static IP address assigned successfully." | A static IP address has been assigned. |
| "[ERROR] DHCP setup failed." | DHCP or network connectivity failed. |
| "[IP] Applying static IP settings..." | The appliance is applying the static IP settings. |
| "[ERROR] Static IP setup failed." | The static IP configuration failed, and the appliance returned to DHCP. |
| "[INFO] Verifying internet and cloud connectivity..." | The appliance is checking its connection to Sophos services. |
| "[OK] Network connectivity confirmed." | The appliance can reach Sophos services. |
| "[INFO] Activating device serial number with backend service..." | The appliance is activating its serial number with Sophos. |
| "[OK] Device serial number activated successfully." | Serial number activation was successful. |
| "[WARN] Activation error: <message>" | Activation failed. The message gives more information about the problem. |
| "[INFO] Registering device with Central Management..." | The appliance is registering with Sophos. |
| "[OK] Device registration completed successfully." | Registration was successful. |
| "[ERROR] Device registration failed." | Registration failed. |
| "[INFO] Downloading system image..." | The appliance is downloading the system image. |
| "[ERROR] Image download failed." | The system image couldn't be downloaded. |
| "[INFO] Installing NDR image..." | The appliance is installing the NDR image. |
| "[ERROR] Image install failed." | The NDR image couldn't be installed. |
| "[OK] Install completed successfully. Rebooting system..." | Installation is complete and the appliance is restarting. |
During the image download, the console can also show "percentage complete", "transfer speed", and "estimated time remaining".
If the appliance has received an address from DHCP but you see "[ERROR] DHCP setup failed.", check the management network connection and the required outbound connectivity. See Connectivity requirements.
When the appliance is being reset or rolled back, you might see messages such as these in the console:
[INFO] Factory reset in progress...
[OK] Rollback complete. Rebooting system...
The console can show whether the serial number has already been activated:
[OK] Serial number is activated.
[INFO] Serial number is not yet activated...
Appliance information
After first-time activation, the serial console shows appliance information. The output looks similar to this example:
Appliance Model: NDR 5500
Serial Number: N55001Q2ABCD34E
BIOS Version: F2
BMC Version: 1.9
Firmware Version: 9.3.2.2
Firmware Build: 92184531
...
The firmware version identifies the appliance firmware. NDR software updates don't change it, so it might not match the NDR version shown in Sophos Fusion.
Troubleshooting
Issue
The serial console doesn't show any output.
What to do
- Check the physical connection to the serial console port.
- Check that you're using the correct serial connection settings.
- Wait several minutes for the appliance to finish starting.
If the serial console still doesn't show any output, contact Sophos Support.
Contact Sophos Support
If you contact Sophos Support about a serial console issue, have this information available:
- Appliance serial number
- Appliance information shown in the serial console
- Last messages shown in the serial console before the issue occurred, especially any "[ERROR]" or "[WARN]" messages