Skip to content
Looking for the Security Operations help?

NDR 5500 quick start guide

This page summarizes the installation and connection steps. For complete illustrated instructions, safety information, and troubleshooting, see the printed quick start guide supplied with the appliance.

What's in the box

Your appliance is shipped with the NDR 5500 appliance, power cable, rail kit, and a printed copy of the full quick start guide.

Front panel ports

Your appliance includes the following front panel ports:

  • F1-F4: Four SFP28 fiber ports, reserved for future use.
  • LAN 1-8: Eight 2.5GbE copper ports. LAN 1 functions as the management port.
  • EXTP: One dedicated copper port.
  • Expansion bays: Two bays for supported Flexi Port modules.

Setup steps

Set up your appliance as follows:

  1. Rack-mount the appliance and connect the power cable.
  2. Connect the MGMT port (LAN 1) to your management network.
  3. Power on the appliance and wait for the status LED to indicate that it's ready.
  4. Go to the appliance's local IP address to run the setup assistant.
  5. Set the admin password and configure network settings.
  6. Power off the appliance. You'll turn it on after you configure it in Sophos Fusion.
  7. In Sophos Fusion, claim, configure, and register the appliance using the provided serial number. See Deploy a physical Sophos NDR appliance.

    Note

    Complete all deployment steps before connecting the appliance to monitored traffic to ensure traffic is not disrupted.

  8. Connect the monitored network traffic to the appropriate capture ports for your selected appliance mode. See Port wiring.

  9. Check that the appliance status is Healthy on the NDR Appliances page in Sophos Fusion. See NDR Appliances.