Device Configuration : Protect : Intrusion Prevention : DoS : Create a DoS Bypass Rule
Create a DoS Bypass Rule
You can create a DoS Bypass Rule from this page.
1. Device Configuration > Protect > Intrusion Prevention > DoS and click Add under DoS Bypass Rule section.
2. Enter Bypass Rule details.
IP Family
Select the IP Family of the traffic to be bypassed.
Source IP/Netmask (only IPv4)
Specify Source IP/Netmask.
Specify * if you want to bypass entire network.
Destination IP/Netmask (only IPv4)
Specify Destination IP/Netmask.
Specify * if you want to bypass entire network.
Source IP/Prefix (only IPv6)
Specify Source IP/Prefix.
Specify * if you want to bypass entire network.
Destination IP/Prefix (only IPv6)
Specify Destination IP/Prefix.
Specify * if you want to bypass entire network.
Protocol
Select protocol whose traffic is to be bypassed if generated from the specified source to destination.
Available Options:
* TCP
* UDP
* ICMP
* All Protocols
For example, if you select TCP protocol then DoS rules will not be applied on the TCP traffic from the specified source to destination.
Source Port
Specify Port Number for Source.
Specify * if you want to bypass entire network.
Destination Port
Specify Port Number for Destination.
Specify * if you want to bypass entire network.
3. Click Save to add a DoS Bypass Rule.