System & Monitor : Device Settings : Dynamic Objects : Zone : Add Dynamic Zone
Add Dynamic Zone
This page allows you to enter zone details.
1. Go to System Management > Device Settings > Dynamic Objects > Zone and select Add.
2. Enter Dynamic Zone details.
Name
Name to identify the zone.
Type
Select Zone Type - LAN, DMZ
Available Options:
* LAN - Depending on the device in use and network design, one can group one to six physical ports in this zone. Group multiple interfaces with different network subnets to manage them as a single entity. Group all the LAN networks under this zone.
* By default the traffic to and from this zone is blocked and hence the highest secured zone. However, traffic between ports belonging to the same zone will be allowed.
* DMZ (DeMilitarized Zone) - This zone is normally used for publicly accessible servers. Depending on the device in use and network design, one can group one to five physical ports in this zone.
* By default, entire traffic will be blocked except LAN to Local zone services like Administration, Authentication and Network.
3. Enter Device-Zone Mapping details.
Default
Select the zone that is to be mapped with the particular device zone.
Device
Select the device whose zone is to be mapped with the above selected zone.
Zone
Select the zone which is to be mapped.
4. Select Save.