Device Configuration : Configure : VPN : SSL VPN (Remote Access) : Add SSL VPN Remote Access Policy
Add SSL VPN Remote Access Policy
This page allows adding SSL VPN remote access policies.
Following is a description of the different sections of this page:
Device Configuration > Configure > VPN > SSL VPN (Remote Access) > Add
General Settings
Name
Enter a descriptive name for the policy.
Description (optional)
Add a description or other information.
Identity
Policy Members
Click Add New Item to select available users/groups from a list or search for users/groups. Click Apply Selected Items afterwards.
* You can also view and manage active SSL VPN users on the System > Current Activity > SSL VPN Users page. (Only at appliance level)
Selected items are displayed in the list. To remove an item from the list, click the - icon on the right of the item.
Tunnel Access
Use as Default Gateway
Activate the toggle switch if you want to use this as default gateway.
Permitted Network Resources (IPv4)
Click Add New Item to select available network resources from a list or search for network resources. Click Apply Selected Items afterwards.
Selected items are displayed in the list. To remove an item from the list, click the Minus icon on the right of the item.
Permitted Network Resources (IPv6)
Click Add New Item to select available users/groups from a list or search for users/groups. Click Apply Selected Items afterwards.
Selected items are displayed in the list. To remove an item from the list, click the Minus icon on the right of the item.
Idle Timeout
Disconnect Idle Clients
Activate/deactivate by clicking the toggle switch. If activated, clients which are idle will be disconnected from the session after a specified time.
Override Global Timeout (Default 15 Minutes) (only if Disconnect Idle Clients is activated.
Enter the value for the idle timeout in minutes.
* Values between 15 and 60 minutes are valid.
To save the settings click Apply, to cancel, click Cancel.
* New remote access policies immediately appear in the SSL VPN (Remote Access) list.
* For Remote Access connections to work check that LAN and WAN zones are activated for the User Portal on the System > Administration > Device Access page.