Device Configuration : Protect : Wireless : Access Point Groups : Add an Access Point Group
Add an Access Point Group
This page describes how you can add an access point group.
1. Go to Device Configuration > Protect > Wireless > Access Point Groups and click Add.
2. Make the following settings for the new access point group.
Name
Enter a descriptive name for the new access point group.
Wireless Networks
Search for wireless networks and select the wireless networks that should be broadcasted by the access points of this group.
* For an access point to broadcast a wireless network some conditions have to be fulfilled. They are explained in chapter Device Configuration > Protect > Wireless > Access Point Groups section Rules for Assigning Networks to APs.
VLAN Tagging
Select Enable if you want to activate VLAN tagging.
* Make sure that the VLAN interface is assigned to the zone which is selected in the Allowed Zone box on the System > System Services > Wireless page.
Access Point
Search for access points and select which you want to add to this group.
* Local WiFi Devices cannot be grouped and do not appear in the Access Point box. Local WiFi Devices appear in the Access Point Groups list.
3. Click Save to save the access point group.
 
The new access point group will be displayed in the Access Point Groups table.