Add an alias

You can bind multiple IP addresses to a single physical interface using an alias.

  1. Go to Network > Interfaces, click Add interface, and select Add alias.
  2. Specify the settings.
    Note You can assign multiple IP addresses from different subnets to a physical interface under these conditions:
    • For internal hosts, XG Firewall must be the default gateway.
    • Upstream devices must have an IP address from each subnet of the alias addresses (that are acting as a gateway for XG Firewall traffic).
    Physical interface Interface to which the alias will be bound.
    IP version IP version that corresponds to the selected interface. For example, aliases of IPv4 interfaces must have IPv4 addresses.
    IPv4/Netmask IPv4 address and subnet mask.
    IPv6/Prefix IPv6 address and prefix.
  3. Click Save.
The IP address is bound to the selected interface.