Add a bridge

  1. Go to Network > Interfaces, click Add interface, and select Add bridge.
  2. Enter a name.
  3. Specify the settings.
    OptionDescription
    Enable routing on this bridge pair Enable routing on this bridge.
    Interface Interfaces on which you can set up a bridge:
    • A physical interface is a port, for example, Port1, PortA, or eth0.
    • RED
    • LAG
    • VLAN interface on a physical interface, RED, or LAG
    Zone Zone assigned to the interface.
  4. Specify IP assignment details.
  5. Optional Specify advanced settings.
    OptionDescription
    MTU MTU (Maximum Transmission Unit) value, in bytes. The MTU is the largest packet size that a network can transmit. Packets larger than the specified value are divided into smaller packets before they are sent.
    Override MSS MSS (Maximum Segment Size), in bytes. The MSS is the amount of data that can be transmitted in a TCP packet.
  6. Click Save.