-
Go to .
-
Specify the initial HA device state.
Option | Description |
---|
Initial HA device state |
Auxiliary |
-
Type and confirm a passphrase.
Note The devices in the cluster must have the same passphrase.
-
Select a dedicated HA link.
Option | Description |
---|
Dedicated HA link |
The link to be monitored. Peers in an HA cluster continuously monitor the dedicated HA link
and the interfaces configured to be monitored. |
Note The peer device must use the same HA link. Specify this port as the HA
link port on the peer. For example, if you choose port E on the primary
device, you must also choose port E on the auxiliary device.
Note The IP address of the HA link for the peer device must be on the same
subnet.
-
Click Save.
Configure the primary device. After you have configured the primary device and when
HA is active, the devices will synchronize automatically. To force the auxiliary
device to pull configuration updates from the primary, click Sync with primary.