Add policy route
- Go to Routing > Policy routing and click Add under IPv4/IPv6 policy route section.
-
Specify the policy route details.
- Name
- Specify a name for policy route.
- Description
- Specify a description for policy route.
-
Specify the traffic selector details.
- Incoming interface
- Select the incoming interface receiving the packet.Note Deleting the incoming interface will also delete the policy route defined for the interface.
- Source networks
- Select the source network(s) of the packet to be routed. A new network host can be created directly from this page itself or from Hosts and services.
- Destination networks
- Select the destination network(s) of the packet to be routed. A new network host can be created directly from this page itself or from Hosts and services.
- Services
-
Select the services(s) of the packet to be routed. These services allow you to specify precisely which kind of traffic should be processed. A new service/service group can be created directly from this page itself or from Hosts and services.
- DSCP marking
-
Select the type of DSCP marking to match the packets marked with the given DSCP value (see DSCP value).
-
Specify the routing details.
- Gateway
- Select the gateway to which you want to forward the packet if the
packet meets the configured matching criteria.Note
- Deleting the gateway will also delete the policy route defined for the gateway.
-
Policy route is not applied when gateway goes down. As soon as the gateway comes up again, traffic is routed through the gateway automatically.
- Click Save.