Override interface configuration

  1. Go to Routing > RIP and click Select interface under the Override interface configuration section.
  2. Enter interface configuration details.
    Interface
    Select the interface for which you want to override the default configuration.

    RIP version

    Send
    Select the RIP version(s) to be used for sending the routing updates.
    You can select V1 or V2 or both, V1 and V2. The selection overrides the version selected in the global configuration settings.
    The default setting is V2.
    Receive
    Select the RIP version to be used for receiving the routing updates.
    You can select V1 or V2 or both, V1 and V2. The selection overrides the version selected in the global configuration settings.
    The default setting is V2 and V2.
    Split horizon
    Enable to prevent the routing loops.
    The default setting is disabled.
    Poisoned reverse (only applicable when Split Horizon is enabled)
    Enable to prevent the device from sending packets through the route that has become invalid.
    The default setting is disabled.
    Authentication
    Click to enable authentication of RIP packets.
    If enabled, provide a password to authenticate the RIP packets.
    Passive mode
    Enable to prevent the interface from sending RIP advertisements.
    The default setting is disabled.
  3. Click Save.