SNMP agent configuration

SNMP agent configuration allows you to configure the device as an SNMP agent.

  1. Go to Administration > SNMP.
  2. Select to enable the SNMP agent.
  3. Enter a name.
  4. Enter the description.
  5. Enter the physical location of the device.
  6. Enter the contact information of the person responsible for maintaining the device.
  7. The Agent port uses UDP port 161. This port receives GET requests from the SNMP managers.
  8. Specify the Manager port over which the SNMP manager receives alerts/traps from the SNMP agent.

    Default: 162