Operation: Add SD-WAN policy route / Update SD-WAN policy route
Description: Add an SD-WAN policy routeUpdate an SD-WAN policy route 

Sample Configuration



Parameter Mandatory Default Description
NameYes  
Specify a name for policy route.
Name confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
  • Character not allowed: Comma (,)
  • Maximum characters allowed are 60.
  • UTF-8 character(s) are allowed.
DescriptionNo  
Enter a description for the SD-WAN policy route.
Description confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 255.
IPFamilyYes IPv4 
Select the IP family.
IPFamily confines to:
  • Type is 'SCALAR'.
  • Only 'IPv4', 'IPv6' are allowed.
NetworkNo  
Select the source network(s) of the packet to be routed.
Network confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 60.
  • Multiple values are allowed.
NetworkNo  
Select the destination network(s) of the packet to be routed.
Network confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 60.
  • Multiple values are allowed.
ServiceNo  
Select the services(s) of the packet to be routed.
Service confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 60.
  • Multiple values are allowed.
UserNo  
Select the users and groups from the list.
User confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 256.
  • Multiple values are allowed.
BackupGatewayNo  
Select the backup gateway to which you want to forward the packet if the packet meets the configured matching criteria.
BackupGateway confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
InterfaceNo  
Select the incoming interface receiving the packet.
Interface confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
DSCPMarkingNo  
Select the type of DSCP Marking to match the packets marked with the given DSCP value.
DSCPMarking confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
  • Range 1 to 64 is allowed.
HealthcheckNo  
Turn on health check to monitor the SD-WAN policy route.
Healthcheck confines to:
  • Type is 'SCALAR'.
  • Only 'OFF', 'ON' are allowed.
ApplicationObjectNo  
Select the application objects.
ApplicationObject confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Maximum characters allowed are 60.
  • Multiple values are allowed.
GatewayYes  
Select the gateway to which you want to forward the packet if the packet meets the configured matching criteria.
Gateway confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.



Operation   Status   Message
Add SD-WAN policy route200
Add SD-WAN policy route500
Add SD-WAN policy route502
Update SD-WAN policy route200
Update SD-WAN policy route500


© Copyright 2019 Sophos Firewall Limited. All rights reserved.
Sophos Firewall is registered trademarks of Sophos Firewall Limited and Sophos Firewall Group. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.