Operation: Update Access Point
Description: The page allows one to update Access Points. 

Sample Configuration
<WirelessAccessPoint> <ID>A40016ADB63B7F1</ID> <Label>AP30[A40016ADB63B7F1]</Label> <Country>India</Country> <Group>No Group/wlgroup</Group> <WirelessNetworks> <Network>wlnet1</Network> <Network>wlnet2</Network> </WirelessNetworks> <MeshNetwoks> <MeshNetwok> <MeshID>mesh1</MeshID> <Role>RootAccessPoint</Role> </MeshNetwok> <MeshNetwok> <MeshID>mesh2</MeshID> <Role>RootAccessPoint</Role> </MeshNetwok> </MeshNetwoks> <Channel2.4GHz>Auto/1/2/3</Channel2.4GHz> <DynChan>Enable</DynChan> <TimeBasedScan>Enable</TimeBasedScan> <ScanTime> <Time>All Time on Weekends</Time> </ScanTime> <TXPower>100%</TXPower> <Channel5GHz>Auto/1/2/3</Channel5GHz> <DynChan5GHz>Enable</DynChan5GHz> <TimeBasedScan5GHz>Enable</TimeBasedScan5GHz> <ScanTime5GHz> <Time>All Time on Weekends</Time> </ScanTime5GHz> <TXPower5GHz>100%</TXPower5GHz> <STP>Enable/Disable</STP> <VLANTagging>Enable</VLANTagging> <APVLANID>25</APVLANID> <Band>2.4GHz</Band> <AllowedChannels>1,2,3,4,5,6,7,8,9,10,11,12,13,36,40,44,48,52,56,60,64,100,104,108,112,116,132,136,140</AllowedChannels> </WirelessAccessPoint>



Parameter Mandatory Default Description
IDYes  
Displays ID of the Access Point.
ID confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
LabelYes  
Specify label
Label confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
  • Character not allowed: Comma (,)
  • Maximum characters allowed are 30.
  • UTF-8 character(s) are allowed.
CountryYes  
Select Country where the Access Point is located.
Country confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
GroupNo  
Select Access point group for the Access Point.
Group confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
NetworkNo  
Select Wireless Networks for the Access Point.
Network confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Multiple values are allowed.
  • Duplicate values will not be ignored.
RoleNo  
Select role for the Access Point.
Role confines to:
  • Type is 'ARRAY'.
  • Only 'MeshAccessPoint', 'RootAccessPoint' are allowed.
  • Multiple values are allowed.
  • Duplicate values will not be ignored.
Channel2.4GHzNo  
Select a channel that will be used by the access point.(2.4 GHz)
Channel2.4GHz confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
DynChanNo Disable 
Select this to enable Access Point to scan for channels dynamically.(5 GHz)
DynChan confines to:
  • Type is 'SCALAR'.
  • Only 't' are allowed.
Note:
Dyn chan export status:
Disabled: Channel is static, DCS is disabled
1: Channel set to auto, DCS is not set
Enabled: Channel set to auto, DCS is set.
TimeBasedScanNo Disable 
Select this to enable Time Based scan for Access Point.(2.4 GHz)
TimeBasedScan confines to:
  • Type is 'SCALAR'.
  • Only 't' are allowed.
Note:
Applicable only if Dyn Chan is enabled..
APTypeNo  
Specify 'type'
APType confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
ChannelWidthNo 20MHz 
Specify 'channel_width'
ChannelWidth confines to:
  • Type is 'SCALAR'.
  • Only '20', '40', '80' are allowed.
Note:
Applicable only in 2.4GHz band..
Channel5GHzNo  
Select a channel that will be used by the access point.(2.4 GHz)
Channel5GHz confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
DynChan5GHzNo Disable 
Select this to enable Access Point to scan for channels dynamically.(5 GHz)
DynChan5GHz confines to:
  • Type is 'SCALAR'.
  • Only 't' are allowed.
Note:
Dyn chan export status:
Disabled: Channel is static, DCS is disabled
1: Channel set to auto, DCS is not set
Enabled: Channel set to auto, DCS is set.
TimeBasedScan5GHzNo Disable 
Select this to enable Time Based scan for Access Point.(5 GHz)
TimeBasedScan5GHz confines to:
  • Type is 'SCALAR'.
  • Only 't' are allowed.
Note:
Applicable only if Dyn Chan is enabled..
TimeNo  
Select Scan Time for the Access Point(5 GHz).
Time confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Multiple values are allowed.
Note:
Applicable only if 'Time Based scan'(5 GHz) is enabled..
TXPower5GHzNo 100% 
Select the transmission power output for 5 GHz band.
TXPower5GHz confines to:
  • Type is 'SCALAR'.
  • Only '10%', '25%', '50%', '75%', '100%' are allowed.
STPNo Disable 
Select to use Spanning Tree protocol (STP).
STP confines to:
  • Type is 'SCALAR'.
  • Only 'Disable', 'Enable' are allowed.
VLANTaggingNo Disable 
Select this to enable VLAN tagging and to connect Access Point with an existing VLAN Ethernet Interface.
VLANTagging confines to:
  • Type is 'SCALAR'.
  • Only 'Disable', 'Enable' are allowed.
APVLANIDNo 
Specify the VLAN ID that will be used by the AP to connect to the appliance.
APVLANID confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Range 2 to 4094 is allowed.
  • Maximum digits allowed are 4.
Note:
Available only when 'VLan Tagging' is selected..
InterfaceNo  
Select the interface on which you want to configure the access point.
Interface confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
LanMacNo  
Show the LAN MAC address of the access point.
LanMac confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
WifiMacNo  
Show the Wi-Fi MAC address of the access point.
WifiMac confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
AllowedChannelsNo  
Allowed channels for the access point.
AllowedChannels confines to:
  • Type is 'SCALAR'.
  • Datatype is 'STRING'.
MeshIDNo  
Select Mesh Networks for the Access Point.
MeshID confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Multiple values are allowed.
  • Duplicate values will not be ignored.
ChannelWidth11aNo 40MHz 
Specify 'channel_width11a'
ChannelWidth11a confines to:
  • Type is 'SCALAR'.
  • Only '20', '40', '80' are allowed.
Note:
Applicable only in 5GHz band..
BandYes  
Select the band for the access point.
Band confines to:
  • Type is 'SCALAR'.
  • Only '5GHz', '2.4GHz' are allowed.
Note:
Only for APX320 this value could be 2.4Ghz/5GHz. Other APs must use 2.4Ghz.
TXPowerNo 100% 
Select the transmission power for the Access Point.
TXPower confines to:
  • Type is 'SCALAR'.
  • Only '10%', '25%', '50%', '75%', '100%' are allowed.
TimeNo  
Select Scan Time for the Access Point(2.4 GHz).
Time confines to:
  • Type is 'ARRAY'.
  • Datatype is 'STRING'.
  • Multiple values are allowed.
Note:
Applicable only if 'Time Based scan'(2.4 GHz) is enabled..



Operation   Status   Message
Update Access Point200
Update Access Point500
Update Access Point523
Update Access Point524
Update Access Point542
Update Access Point216
Update Access Point541
Update Access Point543
Update Access Point545
Update Access Point544
Update Access Point547


© Copyright 2019 Sophos Firewall Limited. All rights reserved.
Sophos Firewall is registered trademarks of Sophos Firewall Limited and Sophos Firewall Group. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.