Operation: Login Security Settings
Description: Configure Login Security Settings for Remote Administrators. 

Sample Configuration
<AdminSettings> <LoginSecurity> <LockSession>Disable/{value}</LockSession> <LogoutSession>Disable/{value}</LogoutSession> <BlockLogin>Enable/Disable</BlockLogin> <BlockLoginSettings> <UnsucccessfulAttempt>2</UnsucccessfulAttempt> <Duration>20</Duration> <ForMinutes>3</ForMinutes> </BlockLoginSettings> </LoginSecurity> </AdminSettings>



Parameter Mandatory Default Description
LockSessionNo  
Enable to lock Admin Session after configured timeout.
LockSession confines to:
  • Type is 'SCALAR'.
  • Only '1' are allowed.
LockSessionNo 
Inactivity Timeout in minutes to lock Admin session.
LockSession confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Maximum digits allowed are 2.
LogoutSessionNo  
Enable to logout Admin Session after configured timeout.
LogoutSession confines to:
  • Type is 'SCALAR'.
  • Only '1' are allowed.
LogoutSessionNo 10 
Inactivity Timeout in minutes to logout Admin session.
LogoutSession confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Range 1 to 120 is allowed.
  • Maximum digits allowed are 3.
Note:
Admin Session Logout time value must be greater than Lock Admin Session time.
BlockLoginNo  
Enable to block Admin login after configured number of failed attempts within configured time span.
BlockLogin confines to:
  • Type is 'SCALAR'.
  • Maximum characters allowed are 1.
  • Only 'Enable' are allowed.
UnsucccessfulAttemptNo 
Allowed number of failed Admin login attempts from the same IP address.
UnsucccessfulAttempt confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Range 1 to 5 is allowed.
  • Maximum digits allowed are 1.
DurationNo 20 
Time span within which if Admin Login attempts exceed configured ???Unsuccessful Attempts???, then Admin Login gets blocked.
Duration confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Range 1 to 120 is allowed.
ForMinutesNo 
Time interval for which Admin Login is blocked.
ForMinutes confines to:
  • Type is 'SCALAR'.
  • Datatype is 'INTEGER'.
  • Range 1 to 60 is allowed.



Operation   Status   Message
Login Security Settings200
Login Security Settings500


© Copyright 2019 Sophos Firewall Limited. All rights reserved.
Sophos Firewall is registered trademarks of Sophos Firewall Limited and Sophos Firewall Group. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.