Configure the auxiliary XG Firewall

  1. Go to System services > High availability.
  2. Specify the initial HA device state.
    OptionDescription
    Initial device role Auxiliary
  3. Select Interactive mode.
  4. A Passphrase is generated automatically. You can also change the Passphrase manually.
    Note The devices in the cluster must have the same passphrase.
  5. Select a dedicated HA link.
    OptionDescription
    Dedicated HA link The link to be monitored. Peers in an HA cluster continuously monitor the dedicated HA link and the interfaces configured to be monitored.
    Note The peer device must use the same HA link. Specify this port as the HA link port on the peer. For example, if you choose port E on the primary device, you must also choose port E on the auxiliary device.
    Note The IP address of the HA link for the peer device must be on the same subnet.
  6. Click Save.

Configure the primary device. After you have configured the primary device and when HA is active, the devices will synchronize automatically. To force the auxiliary device to pull configuration updates from the primary, click Sync with primary.