Skip to content

Gateways

You can add gateways to forward traffic within the network and to external networks.

You can add IPv4 and IPv6 gateways. You can also edit, clone, and delete custom gateways.

Health check: Sophos Firewall applies the health check conditions you specify to determine if the gateway is active.

Gateway zones: You can assign a zone to custom gateways. Sophos Firewall only applies the zone to traffic when the gateway is assigned to a matching SD-WAN policy route.

Warning

Gateway zones don't apply to SD-WAN policy routes migrated from 18.0 MR1 and earlier.

The following rules apply to custom gateways and the zones assigned to them:

  • VPN zone: You can't assign a VPN zone to custom gateways.
  • Automatically created gateways: Sophos Firewall automatically creates a gateway when you configure a physical WAN interface. You can't change the zone for these gateways from Routing > Gateways.
  • Gateway load balancing: You can only implement load balancing over gateways configured with a physical WAN interface. To see these gateways, go to Network > WAN link manager.

    Custom gateways don't participate in load balancing even when you assign a WAN zone to the gateway.

Use case: Use the gateway zone to create SD-WAN policy routes for network hosts (example: servers) located in different zones. The zone setting enables you to apply firewall rules based on the gateway zone.

Indicators of gateway status:

Icon showing active status.: Active gateway

Icon showing inactive status.: Inactive gateway