|  | Add IP Tunnel / Edit IP Tunnel | 
| To Add/Edit IP Tunnel. IP Tunnel is an Internet Protocol network communications path between two networks. | 
| Sample Configuration | |
|---|---|
| Parameter | Mandatory | Default | Description | 
|---|---|---|---|
| Name | No | Specify a descriptive name for the tunnel. Name confines to: 
 | |
| TunnelType | Yes | Select the type of tunnel from the available options: 6in4, 6to4, 6rd or 4in6. TunnelType confines to: 
 | |
| Zone | Yes | Select the Zone from the available options: LAN, WAN or DMZ. Zone confines to: 
 | |
| LocalEndPoint | Yes | Specify IP Address of the Local End Point of the tunnel. LocalEndPoint confines to: 
 | |
| RemoteEndPoint | Yes | Specify IP Address of the Remote End Point of the tunnel. RemoteEndPoint confines to: 
 | |
| TTL | No | 0 | Specify the life time of data. TTL confines to: 
 | 
| TOS | No | 0 | Specify the priority of data. TOS confines to: 
 | 
| Prefix | No | Specify Prefix if selected tunnel type is '6rd'. Prefix confines to: 
 | |
| Hardware | No | Specify a name for the tunnel. Hardware confines to: 
 | 
| Operation | Status | Message | 
|---|---|---|
| Add IP Tunnel | 200 | |
| Add IP Tunnel | 500 | |
| Add IP Tunnel | 502 | |
| Add IP Tunnel | 503 | |
| Add IP Tunnel | 505 | |
| Edit IP Tunnel | 200 | |
| Edit IP Tunnel | 500 | |
| Edit IP Tunnel | 503 | |
| Edit IP Tunnel | 505 |