| Add SD-WAN route / Update SD-WAN route |
Add an SD-WAN policy route.Update an SD-WAN policy route. |
Sample Configuration | |
---|---|
Parameter | Mandatory | Default | Description |
---|---|---|---|
Name | Yes | Name of the SD-WAN route. Name confines to:
| |
Description | No | Description for the route. Description confines to:
| |
IPFamily | Yes | IPv4 | Enter IPv4 or IPv6. IPFamily confines to:
|
Network | No | Source networks of the traffic. Network confines to:
| |
Network | No | Destination networks of the traffic. Network confines to:
| |
Service | No | Port and protocol over which to route the traffic. Service confines to:
| |
User | No | Users and groups whose traffic you want to apply the route to User confines to:
| |
BackupGateway | No | Backup gateway to use (if you want to) when the primary gateway fails. BackupGateway confines to:
| |
LinkSelection | No | Method of link selection. LinkSelection confines to:
| |
Interface | No | Incoming interface that receives the packets. Interface confines to:
| |
DSCPMarking | No | DSCP value of packets to match with the SD-WAN route. DSCPMarking confines to:
| |
Healthcheck | No | Turn this SD-WAN route on or off when all the specified gateways are down. Healthcheck confines to:
| |
SDWANProfileName | Yes | SD-WAN profile to assign to the route. Profiles have gateways assigned to them. SDWANProfileName confines to:
| |
ApplicationObject | No | Enter the application objects. ApplicationObject confines to:
| |
Gateway | No | Primary gateway for routing the traffic. Gateway confines to:
|
Operation | Status | Message |
---|---|---|
Add SD-WAN route | 200 | |
Add SD-WAN route | 500 | |
Add SD-WAN route | 502 | |
Update SD-WAN route | 200 | |
Update SD-WAN route | 500 |