| Add IP Tunnel / Edit IP Tunnel |
To Add/Edit IP Tunnel. IP Tunnel is an Internet Protocol network communications path between two networks. |
Sample Configuration | |
---|---|
Parameter | Mandatory | Default | Description |
---|---|---|---|
Name | No | Specify a descriptive name for the tunnel. Name confines to:
| |
TunnelType | Yes | Select the type of tunnel from the available options: 6in4, 6to4, 6rd or 4in6. TunnelType confines to:
| |
Zone | Yes | Select the Zone from the available options: LAN, WAN or DMZ. Zone confines to:
| |
LocalEndPoint | Yes | Specify IP Address of the Local End Point of the tunnel. LocalEndPoint confines to:
| |
RemoteEndPoint | Yes | Specify IP Address of the Remote End Point of the tunnel. RemoteEndPoint confines to:
| |
TTL | No | 0 | Specify the life time of data. TTL confines to:
|
TOS | No | 0 | Specify the priority of data. TOS confines to:
|
Prefix | No | Specify Prefix if selected tunnel type is '6rd'. Prefix confines to:
| |
Hardware | No | Specify a name for the tunnel. Hardware confines to:
|
Operation | Status | Message |
---|---|---|
Add IP Tunnel | 200 | |
Add IP Tunnel | 500 | |
Add IP Tunnel | 502 | |
Add IP Tunnel | 503 | |
Add IP Tunnel | 505 | |
Edit IP Tunnel | 200 | |
Edit IP Tunnel | 500 | |
Edit IP Tunnel | 503 | |
Edit IP Tunnel | 505 |