Add Dynamic Zone

This page allows you to enter zone details.

  1. Go to System Management > Device Settings > Dynamic Objects > Zoneand select Add.
  2. Enter Dynamic Zone details.
    Name
    Name to identify the zone.
    Type
    Select Zone Type - LAN, DMZ
    Available Options:LAN - Depending on the device in use and network design, one can group one to six physical ports in this zone. Group multiple interfaces with different network subnets to manage them as a single entity. Group all the LAN networks under this zone.
    Note By default the traffic to and from this zone is blocked and hence the highest secured zone. However, traffic between ports belonging to the same zone will be allowed.
    DMZ (DeMilitarized Zone) - This zone is normally used for publicly accessible servers. Depending on the device in use and network design, one can group one to five physical ports in this zone.
    Figure: Add Zone details
    Note By default, entire traffic will be blocked except LAN to Local zone services like Administration, Authentication and Network.
  3. Enter Device-Zone Mapping details.
    Default
    Select the zone that is to be mapped with the particular device zone.
    Device
    Select the device whose zone is to be mapped with the above selected zone.
    Zone
    Select the zone which is to be mapped.
    Figure: Device-Zone Mapping
  4. Select Save.