Add a Web Server

This page describes how to add a web server.

  1. Go to Device Configuration > Protect > Web Server > Web Servers and click Add.
  2. Make the following settings:
    Name
    Enter a descriptive name for the web server.
    Description
    Enter a description or other information.
    Host
    Add or select a host, which can either be of the type Host or DNS Host.
    Note DNS Host is recommended here because hosts listed with their IP address transmit empty host headers which leads to problems with some browsers.
    Type
    Select a real web server type. Whether you want the communication between Sophos XG Firewall and the real server to be encrypted (HTTPS) or plaintext (HTTP).
    • Encrypted (HTTPS): Browser-based access to real web server via HTTPS.
    • Plaintext (HTTP): Browser-based access to real web server via HTTP. Default.
    Port
    Enter a port number for the real web server. By default the standard port of the selected real server type is selected.
    Keep alive
    Enable Keep alive to keep the connection between Sophos XG Firewall and the real server open instead of opening a new connection for every single request..
    Note In rare cases where the real web server does not support keep alive properly, this feature can provoke reading errors or time-outs and should then be disabled for the affected real server.
    Timeout
    Enter a time-out for the Keep alive option. Values between 1 and 65535 seconds are allowed. Default is 300 seconds.
    Figure: Add Web Server
  3. Click Save to save your settings.
The server is created and appears in the web servers list.