L2TP

On this page you can enable L2TP and configure the settings for L2TP connections.

Device Configuration > Configure > VPN > L2TP Settings

Following is a description of the settings of this page:

Enable L2TP

Click this checkbox to enable/disable L2TP.

General Settings

Assign IP From

Set an IP address range which is used to distribute IP addresses to L2TP clients. This should be a private IP address range.

Allow leasing IP address from RADIUS server for L2TP, PPTP and CISCO VPN Client
If this option is enabled and if the user is authenticated via a RADIUS server, the configured IP address (static and the IP address range) is overridden with the IP address provided by the RADIUS server. If no IP addresses are configured on the RADIUS server, the static IP address configured for the user will be assigned, else an IP address will be leased from configured IP address range.

Client Information

Primary/Secondary DNS Server

Specify up to two DNS servers of your organization. If there is no DNS server available in the list, you can select Other and enter the IP address of a DNS server into a textfield.

Primary/Secondary WINS Server

Specify up to two WINS servers of your organization. If there is no WINS server available in the list, you can select Other and enter the IP address of a WINS server into a textfield.