Add SSL VPN Site-to-Site Server Connection

This page describes how to add a SSL VPN site-to-site server connection.

  1. Go to Device Configuration > Configure > VPN > SSL VPN (Site to Site) and click Add in the Server section.
  2. Enter values for the following settings:
    Connection Name
    Enter a descriptive name for the connection.
    Use Static Virtual IP Address (optional)
    Only select this option if the IP address pool is not compatible with the client's network environment: By default clients are assigned an IP address from a Virtual IP pool. Rarely, it may happen that such an IP address is already in use on the client's host. In that case enter a suitable IP address in the Static Peer IP field which will then be assigned to the client during tunnel setup.
    Local Networks
    Select or add one or more remote networks that are allowed to connect to the local network(s).
    Remote Networks
    Select or add one or more remote networks that are allowed to connect to the local network(s).
    Description (optional)
    Enter a description or other information.
    Figure: Add SSL Connection
  3. Click Save to save your settings.
The new SSL server connection appears on the Server list.

To either edit or delete a server connection, click the corresponding buttons in the Server list.

The next step is the client configuration which has to take place on client side and not on server side. Download the client configuration file with help of the provided button in the Server list.
Note If you want to send the file via mail it is recommended that you use the encryption option which is provided in the download dialog.
How to configure the client is described in chapter System > VPN > SSL VPN Site-to-Site > Add Client Site-to-Site.