RED Management

This chapter describes how to configure Sophos RED. RED is short for Remote Ethernet Device and is a means to connect remote branch offices and the like to your main office as if the branch office is part of your local network.

The setup consists of Sophos UTM on AWS in your main office and a Remote Ethernet Device (RED) in your remote office. Establishing a connection between the two is utmost easy as the RED appliance itself does not need to be configured at all. As soon as the RED appliance is connected to your Sophos UTM on AWS it behaves like any other Ethernet device on your Sophos UTM on AWS. All traffic of your branch office is safely routed via your Sophos UTM on AWS which means that your branch office is as secure as your local network.

These types of RED appliances are available:

The following topics are included in this chapter:

RED: Setup Sketch

Setting up a RED environment involves the following steps:

  1. Activation of RED support.
  2. Configuration of the RED appliance on your Sophos UTM on AWS.
  3. Connecting the RED appliance to the Internet on the remote site.

Note – The overview page of RED displays general information on the RED architecture as long as no RED appliance is configured. When a RED appliance has been configured, the page will display information on the RED status.

Related Topics Link IconRelated Topics