Configuring a Mobile Device

On the mobile device, prior to installing the configuration, the appropriate OpenVPN client software has to be installed on your device. It can be downloaded via the appropriate link: Google Play or App Store.

Then, the allowed user downloads the configuration from the UTM User Portal. The UTM User Portal is available to all remote access users. From this portal, you can download guides and tools for the configuration of your client. You should get the following user credentials for the User Portal from your system administrator: IP address, username, and password.

    1. On the mobile device, start your browser and open the User Portal.

      Start your browser and enter the management address of the User Portal as follows: https://IP address (example:

      A security note will be displayed.

      Accept the security note.

    2. Log in to the User Portal.

      Enter your credentials:

      Username: Your username, which you received from the administrator.

      Password: Your password, which you received from the administrator. Please note that passwords are case-sensitive.

      Click Login.

    3. On the Remote Access page, download the configuration for setting up your SSL VPN connection.

      This page can contain up to five sections, depending on the remote access connection types your administrator enabled for you.

      In the SSL VPN section, Click the Install button.

    4. Follow the instructions on the mobile device.

      Open the configuration with the OpenVPN software and add the configuration there.

    5. Close the User Portal session by clicking Log out.

    Now you should be able to connect via SSL VPN.

  • © 2019 Sophos Limited Sophos UTM 9.600