On the Uplink Monitoring > Global tab you can enable or disable uplink monitoring.

To enable uplink monitoring, click the toggle switch.

The toggle switch turns green.

If uplink monitoring is enabled, the Uplink Status section shows all current uplink interfaces and their statuses:

Note – If uplink balancing is enabled, the uplinks will always be monitored, even if uplink monitoring is disabled. Therefore, even if uplink monitoring is disabled, the uplink interfaces are displayed on this page when uplink balancing is enabled. In this case, the monitoring settings can be modified on the Interfaces > Uplink Balancing tab.

Related Topics Link IconRelated Topics