How to configure the endpoint devices
Note: The steps in this section must be performed by the users.
For users to be able to access the UTM through PPTP VPN, they must configure their client device. For that, they must access the UTM User Portal with a browser from their remote client. Then, they can view installation instructions. After that, they can configure the VPN connection in Windows.
Configure Windows 10
-
Go to Start > Settings.
-
In the dialog, go to Network & Internet > VPN.
-
Click Add a VPN connection.
-
In the dialog, make the following settings:
VPN provider: Select Windows (built-in).
Connection name: Enter a name for the connection.
Server name or address: Enter the DNS name or the IP address of your organization’s server that accepts remote access connections. Your organization’s administrator should have provided this information to you.
VPN type: Select Point to Point Tunneling Protocol (PPTP)L2TP/IPsec with pre-shared key. Automatic should work as well if Windows can determine the type while establishing the connection.
Pre-shared key: Enter the preshared key configured for you.
Type of sign-in info: Select User name and password.
-
(Optional) You can enter your username and password now. You can also save these along with the connection.
If you don’t enter your credentials, Windows prompts you when you initiate the connection.
- Click Save.
- Select Connect to test the connection.
- Close the dialog once you’re finished.