Skip to content

Page permalink

Always use the following permalink when referencing this page. It will remain unchanged in future help versions.

https://docs.sophos.com/nsg/switch/help/en-us/index.html?contextId=cli-network-services-port-isolation

Port isolation

port-isolation

Command Objective: This command set the status of the traffic to be allowed in these configured egress ports when the ingress is this interface.

Syntax: port-isolation {enable|disable}

Parameter Description:

  • enabled: Enables the Port Isolation rule in this ingress interface.
  • disabled: Disables the Port Isolation rule in this ingress interface.

Mode: Interface Configuration.

show port-isolation status

Command Objective: This command displays the Port Isolation table.

Syntax: show port-isolation status

Mode: Privileged EXEC Mode.