Skip to content

Page permalink

Always use the following permalink when referencing this page. It will remain unchanged in future help versions.

https://docs.sophos.com/nsg/switch/help/en-us/index.html?contextId=cli-power-PDLG

PD Lifeguard

set pdlg

Command Objective: This command enables/disables PD Lifeguard module in the switch.

Syntax: set pdlg {enable | disable}

Mode: Global Configuration Mode.

set pdlg port

Command Objective: This command enables/disables PD Lifeguard module on the specified port.

Syntax: set pdlg port <integer(1-48)> {enable | disable}

Mode: Global Configuration Mode.

set pdlg port - mode

Command Objective: This command selects PD Lifeguard mode on the specified port.

Syntax: set pdlg port <integer(1-48)> mode { auto | force-ping }

Parameter Description:

  • auto: PD reachability is judged by LLDP packet (priority) or ping IP test.
  • force-ping: PD reachability is judged via ping IP test.

Mode: Global Configuration Mode.

set pdlg port - ping ip

Command Objective: This command sets PD Lifeguard ping IP Address on the specified port.

Syntax: set pdlg port <integer(1-48)> ping ip <ucast_addr>

Mode: Global Configuration Mode.

set pdlg port - ping interval

Command Objective: This command sets PD Lifeguard ping IP Interval on the specified port.

Syntax: set pdlg port <integer(1-48)> ping interval <integer(1-3600)>

Mode: Global Configuration Mode.

set pdlg port - ping max-try

Command Objective: This command sets PD Lifeguard ping IP max count on the specified port.

Syntax: set pdlg port <integer(1-48)> ping max-try <integer(1-255)>

Mode: Global Configuration Mode.

set pdlg port - reboot interval

Command Objective: This command sets PD Lifeguard reboot interval between disabling and enabling the specified port.

Syntax: set pdlg port <integer(1-48)> reboot interval <integer(1-600)>

Mode: Global Configuration Mode.

set pdlg port - reboot max-try

Command Objective: This command sets PD Lifeguard reboot PD max retry count on the specified port.

Syntax: set pdlg port <integer(1-48)> reboot max-try <integer(0-20)>

Mode: Global Configuration Mode.

set pdlg port - reboot refresh

Command Objective: This command resets PD Lifeguard reboot retry count on the specified port.

Syntax: set pdlg port <integer(1-48)> reboot refresh

Mode: Global Configuration Mode.

set pdlg port - reboot

Command Objective: This command sets PD Lifeguard reboot allowed or denied on the specified port.

Syntax: set pdlg port <integer(1-48)> reboot {allow | deny}

Parameter Description:

  • allow: allow reboot.
  • deny: deny reboot.

Mode: Global Configuration Mode.

set pdlg reboot port

Command Objective: This command restarts the specified PoE port.

Syntax: set pdlg reboot port <integer(1-48)>

Mode: Global Configuration Mode.

set pdlg port - pd-boot-time

Command Objective: This command sets PD Lifeguard PD boot up time.

Syntax: set pdlg port <integer(1-48)> pd-boot-time <integer(50-1200)>

Parameter Description:

  • pd-boot-time <integer(50-1200)>: The duration waiting for LLDP signal when first switches to auto mode. The reboot max retry value can be set from 50 to 1200. (0 means unlimited).

Mode: Global Configuration Mode.

show pdlg port

Command Objective: This command shows PD Lifeguard per port status.

Syntax: show pdlg port <integer(1-48)>

Mode: Privileged EXEC Mode.

show pdlg detail

Command Objective: This command shows PD Lifeguard status in detail.

Syntax show pdlg detail

Mode: Privileged EXEC Mode