Skip to content
Any configuration changes made locally on the switch won't be synchronized with Sophos Central. We recommend making changes from the Sophos Central control panel instead.

Page permalink

Always use the following permalink when referencing this page. It will remain unchanged in future help versions.

https://docs.sophos.com/nsg/switch/help/en-us/index.html?contextId=user-guide-features-configure-l3P-static-route

Static Route

The static route page allows you to configure the default and static routes for both IPv4 and IPv6 traffic.

IPv4 (IPv4 Route)

Use the IPv4 static route to view and configure the IPv4 static and default route settings. You can create up to 63 static route entries for IPv4.

To add an IPv4 route, do as follows:

  1. Go to Configure > L3 protocols > Static route > IPv4 route.
  2. Click Add.
  3. Enter the Destination IP address.
  4. Enter the Subnet mask.
  5. Enter the Gateway IP address.
  6. Click Apply.

IPv6 (IPv6 Route)

Use the IPv6 static route to view and configure the IPv6 static and default route settings. You can create up to 21 static route entries for IPv6.

To add an IPv4 route, do as follows:

  1. Go to Configure > L3 protocols > Static route > IPv6 route.
  2. Click Add.
  3. Enter the Destination IP address.
  4. Enter the Prefix length.
  5. Enter the Gateway IP address.
  6. Click Apply.