Advanced

On the Interfaces & Routing > Dynamic Routing (OSPF) > Advanced tab further OSPF-related configuration options are located concerning the injection (redistribution) of routing information from a domain other than OSPF into the OSPF domain.

Note – Policy routes cannot be redistributed.

Redistribute connected: Select if you want to redistribute routes of directly connected networks; the default metric (cost) value is 10.

Redistribute static: Select if you want to redistribute static routes.

Note – IPsec tunnels must have Strict Routing disabled to be redistributed (see chapter Connections).

Redistribute IPsec: Select if you want to redistribute the IPsec routes; the Bind To Interface option should be disabled.

Redistribute SSL VPN: Select if you want to redistribute SSL VPN; the default metric (cost) value is 10.

Redistribute BGP: Select if you want to redistribute BGP routes; the default metric (cost) value is 10.

Announce default route: Select if you want to redistribute a default route into the OSPF domain; the default metric (cost) value is 25. Announce default route does not work with IPv6.

Note – A default route will be advertised into the OSPF domain regardless of whether it has a route to 0.0.0.0/0.

Interface link detection: Select if routes on interfaces should only be announced if an interface link is detected.